Advance acoustic BA 5321 Manuel d'instructions télécharger pdf (Page 21)

EFKA DA321G5321 (BA)

4.4 Program Identification

Function with control panel Parameter

Program number, modification index and identification number display 179

Display example parameter 179 on the V810 control panel:

 Select parameter 179.

 Press the E key  Sr5 [°] is displayed

 Press the >> key  e. g 5321H is displayed (Program number with index)

 Press the E key  e. g 010823 is displayed (1st part of date)

 Press the E key  e. g 15 is displayed (2nd part of date)

 Press the E key  e. g 1F68 is displayed (EPROM check sum)

 Press the P key twice  dA321G is displayed (Sewing process can be started)

Display example parameter 179 on the V820/V850 control panel:

 Select parameter 179.

 Press the E key  F-179 Sr5 [°] is displayed

 Press the >> key  e. g. PrG 5321H is displayed (Program number with index)

 Press the E key  e. g. dAt 01082315 is displayed (Date)

 Press the E key  e. g. chk 1F68 is displayed (EPROM check sum)

 Press the E key 

e. g. 132650210015 is displayed (Serial number)

 Press the E key  e. g. Skn 01047543 is displayed (Control box number)

 Press the P key twice  4000 dA321G is displayed (Sewing process can be started)

4.5 Direct Input of Maximum Speed Limitation (DED) with Control Panel

The maximum speed of the machine must be limited to the specific level according to the application. Do the setting at the

operator level using keys +/- at any time. The actual value is shown on the display. The speed setting range is between

parameter 111 (upper limit) and parameter 121 (lower limit).

4.5.1 Setting on the V810 Control Panel

Type designation is displayed. 

Maximum speed is displayed

(reading remains on for max. 5 seconds) 

Change the value;

e. g. press key – 8 times. 

After approx. 5 seconds the display shows 

4.5.2 Setting on the V820/V850 Control Panel

Actual display value, in the direct mode

Maximum speed and type designation are displayed 

Change the maximum speed value;

e. g. press key – 8 times ! 

d A 3 2 1 G

4 0 0 0

- 3 2 0 0

d A 3 2 1 G

4000 dA321G

- 3200 dA321G

Note

Changing the setting of the maximum speed limitation also affects the start backtack, end backtack and stitch

counting speeds.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 91 92

Commentaires sur ces manuels

Pas de commentaire

Advance acoustic BA 5321 Manuel d'instructions Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Machine à plancher Advance acoustic BA 5321