Advance acoustic BA 5321 Manuel d'instructions télécharger pdf (Page 67)

EFKA DA321G5321 (BA)

8.18.2 Stitch Counting Speed

Function with or without control panel Parameter

Stitch counting speed (n12) 118

Speed mode for a seam with stitch counting (SGn) 141

Speed control for stitch counting can be selected using parameter 141.

141 = 0 Execution at pedal controlled speed.

141 = 1 Execution at fixed speed n12, when pressing the pedal forward (position >1).

141 = 2 Execution at limited speed n12, when pressing the pedal forward (position >1).

141 = 3 Automatic execution at fixed speed after having pressed the pedal once.

The procedure can be interrupted by “heelback (-2)".

141 = 4 Automatic execution at fixed speed after having pressed the pedal once.

The procedure can be interrupted by “heelback (-2)".

The sewing speed is reduced in each stitch depending on the actual speed (max. 11 stitches before the end of stitch

counting), in order to be able to stop exactly at the end of counting. When the light barrier is on, free sewing will be

performed after stitch counting.

8.18.3 Seam with Stitch Counting When Light Barrier Is On

Function with or without control panel Parameter

Light barrier On/Off (LS) 009

Stitch counting On/Off (StS) 015

Function with control panel V820/V850

Light barrier On/Off Key 3

Stitch counting On/Off Key 2

When "stitch counting and light barrier function " is set, the number of stitches will be executed first, then the light barrier

will be activated.

8.19 Free Seam and Seam with Light Barrier

Function with or without control panel Parameter

Positioning speed (n1) 110

Upper limit of maximum speed (n2) 111

Limited speed according to setting of 142 (n12) 118

Lower limit of maximum speed (n2_) 121

Speed mode free seam (SFn) 142

Through the use of parameter 142 the speed control for the free seam and the seam with stitch counting can be selected

using the speed mode.

142 = 0 Execution at pedal controlled speed

142 = 1 Execution at fixed speed n12, when pressing the pedal forward (position >1)

142 = 2 Execution at limited speed n12, when pressing the pedal forward (position >1)

141 = 3 Only for the seam with light barrier:

- Automatic execution at fixed speed after having pressed the pedal once.

- The seam end is initiated by light barrier.

- The procedure can be interrupted by heelback (-2).

- If the light barrier is not on, speed as with parameter setting 142 = 0.

When using a control panel, the maximum speed is displayed after power on and thread trimming and can be varied

directly by means of key +/- on the control panel. The setting range lies between the values of parameters 111 and 121.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 91 92

Commentaires sur ces manuels

Pas de commentaire

Advance acoustic BA 5321 Manuel d'instructions Page 67

Commentaires sur ces manuels

Produits connexes et manuels pour Machine à plancher Advance acoustic BA 5321